Odd-Form Component Insertion Machine OIM-2FC-W
Odd-Form Component Insertion Machine OIM-2FC-W
The old-form insertion machine is a machine that automatically installs the braided electronic components on the printed circuit board according to the program. The traditional electronics assembly industry mainly relies on workers to insert electronic components on circuit boards. Now that machines are starting to be mass-produced, the speed of manual insertion is slow, and the defects of poor craftsmanship are exposed. Using a plug-in machine to automatically install electronic components on the circuit board can save labor costs and improve the level of plug-in technology.
The old-form insertion machine is a machine that automatically installs the braided electronic components on the printed circuit board according to the program. The traditional electronics assembly industry mainly relies on workers to insert electronic components on circuit boards. Since the mass production of machines, the speed of manual insertion is slow, and the defects of poor workmanship are exposed. Using a plug-in machine to automatically install electronic components on the circuit board can save labor costs and improve the level of plug-in technology. The operation of the plug-in machine basically includes components such as capacitors, inductors, and connectors. The engineers in the design process will divide the work of the plug-in parts of each station according to the workload and rationality. Each machine is only responsible for installation. Several originals, and repeat the same operation, to reduce the chance of error as much as possible.
The operation of the old-form insertion machine basically includes components such as capacitors, inductors, and connectors. The engineers in the design process will divide the work of the plug-in parts of each station according to the workload and rationality. Each machine is only responsible for Install several originals and repeat the same operation to minimize the chance of error. The old-form insertion machine robot is a non-standard plug-in machine. It is equipped with a multi-axis mechanical arm. It can insert different types of parts by using pneumatic slides and air claws. It can be positioned in three-dimensional space visually. The manipulator can grab plug-ins of any shape. High-speed linear motor Driven; the multi-manipulators work together. The old-form insertion machine is a mechanical device that automatically and standardly inserts some regular electronic components into the conductive through holes of the printed circuit board. The main difference is that the old-form insertion machine robot can insert all kinds of components, and the plug-in machine must only be able to plug in regular electronic components. The difference between old-form insertion machine and traditional plug-in machine. In addition to the software components in standardized packaging, the old-form insertion machine can also insert various components in non-standard packaging or reel materials. The visual three-dimensional space is precisely positioned, and the components with unique shapes can be picked and placed through the XYZ axis mechanism. High-speed Parallel line motor driver, multi-gripper cooperative movement for special-shaped component insertion work. The standard plug-in machine can only match electronic components with standard packaging (if there is continuous packaging, the spacing between component pins is fixed at 2.5/5.0mm). The most important difference lies in the matching of components. You can choose a feeding device that matches tape and reel components, tubular components, and bulk components.
The old-form insertion machine is a machine that automatically installs the braided electronic components on the printed circuit board according to the program. The traditional electronics assembly industry mainly relies on workers to insert electronic components on circuit boards. Now that machines are starting to be mass-produced, the speed of manual insertion is slow, and the defects of poor craftsmanship are exposed. Using a plug-in machine to automatically install electronic components on the circuit board can save labor costs and improve the level of plug-in technology.
The old-form insertion machine is a machine that automatically installs the braided electronic components on the printed circuit board according to the program. The traditional electronics assembly industry mainly relies on workers to insert electronic components on circuit boards. Since the mass production of machines, the speed of manual insertion is slow, and the defects of poor workmanship are exposed. Using a plug-in machine to automatically install electronic components on the circuit board can save labor costs and improve the level of plug-in technology. The operation of the plug-in machine basically includes components such as capacitors, inductors, and connectors. The engineers in the design process will divide the work of the plug-in parts of each station according to the workload and rationality. Each machine is only responsible for installation. Several originals, and repeat the same operation, to reduce the chance of error as much as possible.
The operation of the old-form insertion machine basically includes components such as capacitors, inductors, and connectors. The engineers in the design process will divide the work of the plug-in parts of each station according to the workload and rationality. Each machine is only responsible for Install several originals and repeat the same operation to minimize the chance of error. The old-form insertion machine robot is a non-standard plug-in machine. It is equipped with a multi-axis mechanical arm. It can insert different types of parts by using pneumatic slides and air claws. It can be positioned in three-dimensional space visually. The manipulator can grab plug-ins of any shape. High-speed linear motor Driven; the multi-manipulators work together. The old-form insertion machine is a mechanical device that automatically and standardly inserts some regular electronic components into the conductive through holes of the printed circuit board. The main difference is that the old-form insertion machine robot can insert all kinds of components, and the plug-in machine must only be able to plug in regular electronic components. The difference between old-form insertion machine and traditional plug-in machine. In addition to the software components in standardized packaging, the old-form insertion machine can also insert various components in non-standard packaging or reel materials. The visual three-dimensional space is precisely positioned, and the components with unique shapes can be picked and placed through the XYZ axis mechanism. High-speed Parallel line motor driver, multi-gripper cooperative movement for special-shaped component insertion work. The standard plug-in machine can only match electronic components with standard packaging (if there is continuous packaging, the spacing between component pins is fixed at 2.5/5.0mm). The most important difference lies in the matching of components. You can choose a feeding device that matches tape and reel components, tubular components, and bulk components.
Leave a comment