IN-CIRCUIT AND FUNCTIONAL TESTER ICT/FCT PMP-2000/PMP2000L
New feature advantage ▶Two-stage pressure table control, the pressure table cylinder rises to the highest point during debugging, which is convenient for debugging the needle bed. In the process of automatic operation, it only rises to the midpoint, which reduces the pressing table action time by 1-2 seconds and improves the efficiency of equipment operation.
▶Support Interface mating mechanism, maximum support 2048 pinpoints. The traditional flat cable plug connection needs to repeatedly pull and plug the flat cable every time it is connected to the needle bed, which requires a waste of time for the technicians, and the flat cable directly affects its stability and lifespan after many times of plugging and unplugging.
IN-CIRCUIT AND FUNCTIONAL TESTER ICT/FCT PMP-2000L
Hardware features 1.High-precision double-screw track, to ensure that the track does not have a bell mouth, and does not appear to be dropped or stuck.
2.Anti-crushing function of the board to be tested, to ensure that the board and the needle bed are not flat, and the board is crushed.
3.Incoming board alarm shutdown protection.
4.4 linear bearings are used up and down the track to ensure a consistent level.
5.The main accessories and moving parts adopt big brand materials to ensure the long-term use of the equipment.
Software features 1.The operation interface is simple. The manual interface is clear with interlock protection, the maintenance information can be monitored and reminded according to the maintenance requirements at a set time, and the online status can monitor the docking operation status of the work station.
2.Multi-function check items can be realized by simply checking. Compatible with different scenarios, you need to use the function, and you can check it.
3.Automatically adjust the track, support one-key track adjustment. The storage track model and track width can be edited, which is convenient for direct recall when changing models quickly. Can store 100 groups of models and width data.
4.Powerful monitoring and fault prompt function, simple operation during equipment use, non-professionals can simply handle problems. Event records can summarize the time and frequency of problems.
5.Support all kinds of brand test equipment, support ICT/FCT/burning, and other functions.
Equipment test parameters
Measurable PCBA size:
Min:50×50mm，Max:450×370mm（PMP2000）,530×450mm（PMP2000L），Component height within 60mm.
Operating Voltage: AC220V 50/60HZ.
Orbit accuracy:0.5mm (max).
Transfer method:PCBA transmission (belt), track (screw).
Belt conveying speed:50-200mm/sec.
Operating mode: Aging mode, Test mode, BYPASS mode.
Press table stroke:50-150mm.
Press table movement method: Two-stage, high position in manual mode, middle position in automatic operation.
PCBA safety protection: Optical sensor and mechanical device.
Online versatility: SMEMA standard interface, compatible with loading machine, receiving machine, automatic stamping machine, automatic labeling machine.
Test function system: Support ICT, FCT device signal docking.
Test communication interface: Support PTI, TRI, Agilent, Teradyne test equipment.
Test function: Scan code function: reserved IO signal interface, can manually check the function.
Fixture docking module: Reserve the interface installation position to realize the quick docking of the fixture.
Front and rear docking station: Reserved installation location, support for extended functions.
Remote control: Reserved upgrade port, PLC expansion network port, remote control.
Please make sure your contact information is correct. Your message will
be sent directly to the recipient(s) and will not
be publicly displayed. We will never distribute or sell your personal
information to third parties without
your express permission.