Panasonic NPM-TT2 Pick And Place Machine NM-EJM1E
The NPM-TT2 (Next Production Modular-Twin Tray II) platform represents the next generation in twin tray modular production from Panasonic’s award-winning NPM platform—ideal for any mix.
Further bolstering the SMT process to accommodate more tray-supplied parts in full independently-run-lane mode, the NPM-TT2 processes boards up to 510 x 590mm and its dual lane functionality allows assembly of more of one product or two different products at the same time.
As common throughout the NPM-series, the NPM-TT2 features a Multi-Recognition Camera that increases processing speeds with a dynamic vertical-view of component condition and eliminating the need for a standard line cameras and independent 3D sensors.
With a new, advanced lightweight 3-nozzle head V2 (100N), pin-in-place lighting option and stackable stick feeders, the NPM-TT2 leads the way in terms of odd-placement capabilities.
Designed to blend seamlessly with other Panasonic NPM-series equipment as well at the NPM-DX, the NPM-TT2 optimizes throughput in a high-volume, dual-lane environment
|PC size||Single-lane mode||L 50 x W 50 ~ L 510 x W 590|
|Dual-lane mode||L 50 x W 50 ~ L 510 x W 300|
|M size||Single-lane mode||L 50 x W 50 ~ L 510 x W 510|
|Dual-lane mode||L 50 x W 50 ~ L 510 x W 260|
|PCB exchange time||Single-lane mode||4.0 s (With no component mounted on the reverse side of PCB)|
|Dual-lane mode||0 s* *No 0s when cycle time is 4.0 s or less|
|Electric source||3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA|
|Pneumatic source||Min.0.5 MPa, 200 L /min (A.N.R.)|
|Dimensions *1 (mm)||W 1 300*2 x D 2 798*3 x H 1 444*4|
|Mass||2 690 kg
(Only for main body:This differs depending on the option configuration.)
|Placement head||Lightweight 8-nozzle head
|3-nozzle head V2 *5
|Placement speed||PC size||18 000 cph (0.20 s/chip)||7 200 cph (0.50 s/chip)
5 900 cph (0.61 s/QFP)
|M size||17 460 cph (0.21s/chip)||6 984 cph (0.52 s/chip)
5 723 cph (0.63 s/QFP)
|± 40 µm/chip
± 30 µm/QFP 12mm to 32mm
± 50 µm/QFP 12mm Under
|±40 μm/ chip
±30 μm/ QFP
|0402 chip*6 to L 32 x W 32 x T 12||0603 chip to L 150 x W 25 (diagonal152) x T 30|
|Taping||Tape : 4 to 56 / 72 mm||Tape : 4 to 56 / 72 / 88 / 104 mm|
|Specifications for front/rear tray feeders : Max.52
Specifications for front/rear feeder carts : Max.120 (Tape:4, 8 mm)
|Stick||Specifications for front/rear tray feeders : Max.12 (Single stick feeder)|
|Specifications for front/rear feeder carts : Max.28 (Single stick feeder)|
|Tray||Max.40 (Front supply unit : Max. 20 + Rear supply unit : Max. 20)|
Please make sure your contact information is correct. Your message will be sent directly to the recipient(s) and will not be publicly displayed. We will never distribute or sell your personal information to third parties without your express permission.